Application of Pure Zinc foil
Zinc foil is a particularly thin sheet product of a rectangular
shape. In the presence of foil with a thickness of 0.07 to 0.09 mm.
Zinc is a widespread raw material for the manufacture of a wide variety
of metallurgy products. It is especially appreciated for its special
properties:
Low deformation when interacting with the environment (corrosion, air
sphere)
Zinc foil processed by repeated rolling has thicknesses up to 0.09 mm.
Despite the thickness of less than a millimeter, it is sufficiently tear
resistant and ductile. This helps to process it by stamping, giving the
necessary form of making prints for printing machines.
Zinc is not susceptible to rust. It perfectly tolerates close proximity
to oxygen, water, some acids and other aggressive substances.
Manufacture
Due to the low strength characteristics of zinc, rolling is the most
common form of its plastic deformation today. For this reason, flat
deformable semi-finished products (sheets, ribbons, foil) are most often
made from metal. Less commonly used is the electrolytic manufacturing
method. The resulting products are used in the absence of large
mechanical loads.
The surface of the finished product must be clean and even. Any bubbles,
dents, corrosion defects, or foreign matter are considered defective.
Shields heat well, actively reflecting it in all directions. This
feature of zinc is used in carburetor housings and other industries.
High-quality foil is made of metal with a high degree of purification
and contains an extremely small amount of impurities.
This product must be stored in closed rooms, where it will be protected
from accidental mechanical damage, moisture and chemicals.
Application
Zinc products are used in various fields in a variety of ways, from the
creation of components for high-precision complex equipment, up to the
decorative decoration of the external facades of buildings and various
structures.
High-quality zinc foil that meets all modern requirements, contains no
more than 0.1% impurities. The purity of the alloy guarantees product
efficiency, durability and all the positive qualities inherent in zinc..
Diam
thickness
length
width
purity
Details
Foil
0.03mm -0.8mm
>3000mm
2mm-150mm
99.99%
Details
sheet
0.03mm-50mm
100mm
100mm
99.99%
Details
wire
0.025mm
-0.05mm
7000-8000m
99.99%
Details
Stab
2.0mm
-150mm
<1000mm
99.99%
Details
granules
6mm-13mm
99.99%
Details
Zinc foil is a particularly thin sheet product of a rectangular
shape. In the presence of foil with a thickness of 0.07 to 0.09 mm.
Zinc is a widespread raw material for the manufacture of a wide variety
of metallurgy products. It is especially appreciated for its special
properties:
Low deformation when interacting with the environment (corrosion, air
sphere)
Zinc foil processed by repeated rolling has thicknesses up to 0.09 mm.
Despite the thickness of less than a millimeter, it is sufficiently tear
resistant and ductile. This helps to process it by stamping, giving the
necessary form of making prints for printing machines.
Zinc is not susceptible to rust. It perfectly tolerates close proximity
to oxygen, water, some acids and other aggressive substances.
Manufacture
Due to the low strength characteristics of zinc, rolling is the most
common form of its plastic deformation today. For this reason, flat
deformable semi-finished products (sheets, ribbons, foil) are most often
made from metal. Less commonly used is the electrolytic manufacturing
method. The resulting products are used in the absence of large
mechanical loads.
The surface of the finished product must be clean and even. Any bubbles,
dents, corrosion defects, or foreign matter are considered defective.
Shields heat well, actively reflecting it in all directions. This
feature of zinc is used in carburetor housings and other industries.
High-quality foil is made of metal with a high degree of purification
and contains an extremely small amount of impurities.
This product must be stored in closed rooms, where it will be protected
from accidental mechanical damage, moisture and chemicals.
Application
Zinc products are used in various fields in a variety of ways, from the
creation of components for high-precision complex equipment, up to the
decorative decoration of the external facades of buildings and various
structures.
High-quality zinc foil that meets all modern requirements, contains no
more than 0.1% impurities. The purity of the alloy guarantees product
efficiency, durability and all the positive qualities inherent in zinc..
| Diam | thickness | length | width | purity | Details | ||
|---|---|---|---|---|---|---|---|
|
|
Foil | 0.03mm -0.8mm | >3000mm | 2mm-150mm | 99.99% | Details | |
|
|
sheet | 0.03mm-50mm | 100mm | 100mm | 99.99% | Details | |
|
|
wire | 0.025mm -0.05mm |
7000-8000m | 99.99% | Details | ||
|
|
Stab | 2.0mm -150mm |
<1000mm | 99.99% | Details | ||
|
|
granules | 6mm-13mm | 99.99% | Details | |||